Siemens 6ED1050-1AA00-0BE8 manual Wall-mounting

LOGO! installation and wiring

2.2 Installing/removing LOGO!

Repeat steps 1 to 4 for all other expansion modules.

Note

If you have connected more than one expansion module, it is advisable to start removal with the last module at the right-hand side.

Make sure the slide interlock of the module to be installed/removed is not engaged in the next module.

2.2.2Wall-mounting

For wall-mounting, first slide the mounting slides on the rear side of the devices towards the outside. You can now wall-mount LOGO! by means of two mounting slides and two Ø M4 screws (tightening torque 0.8 to 1.2 Nm).

0RXQWLQJVOLGHV

LOGO!
Manual, 04/2011, A5E03556174-01	43