Siemens 6ED1050-1AA00-0BE8 manual 0R  , Verification of the circuit program

Programming LOGO!

3.7 Writing and starting the circuit program

Verification of the circuit program

This program branch for Q1 is now completed. LOGO! shows you the output Q1. You can once again view the circuit program on the display. Use the keys to browse the circuit program; that is, press or to move from block to block, and to move between the inputs at a block.

Closing the programming mode

Although you were shown how to exit the programming mode when you created your first circuit program, here is a reminder:

1.Return to the programming menu: Press ESC

2.Return to the main menu: Press ESC

3.Move the '>' cursor to 'Start': Press or

4.Confirm 'Start': Press OK

LOGO! is back in RUN mode:

0R



<RXFDQSUHVVႱRUႧWRVFUROOWKHSDJHV DQGWRPRQLWRUWKH,2VWDWHV

	LOGO!
104	Manual, 04/2011, A5E03556174-01