Siemens 6ED1050-1AA00-0BE8 manual Rule 3 Cursor and cursor movement, Rule 4 Planning

Programming LOGO!

3.5 The four golden rules for operating LOGO!

Rule 3: Cursor and cursor movement

The following applies when you edit a circuit program:

●You can move the cursor when it appears in the form of an underscore:

–Press , , or to move the cursor in the circuit program.

–Press OK to change to "Select connector/block".

–Press ESC to exit programming mode.

●You select a connector/block - when the cursor appears as a solid square:

–Press or to select a connector or a block.

–Confirm with OK.

–Press ESC to return to the previous step.

Rule 4: Planning

●Before you start to create a circuit program, you should either first create a design on paper or program LOGO! directly using LOGO!Soft Comfort.

●LOGO! can only save complete and faultless circuit programs.

	LOGO!
80	Manual, 04/2011, A5E03556174-01