Siemens 6ED1050-1AA00-0BE8 manual Weekly timer, Timing diagram three examples

LOGO! functions

4.4 Special functions list - SF

4.4.11Weekly timer

Short description

The output is controlled by means of a configurable on/off date. The function supports any combination of weekdays. You select the active weekdays by hiding the inactive days.

Note

Because LOGO! 24/24o does not have a real-time clock, the weekly timer function is not available for both versions.

Symbol in LOGO!			Wiring	Description
0BA6
1R			Cam parameters	At the Cam parameters, you set the on- and off-times of the
			1, 2, and 3	weekly timer for each Cam switch. Here you also configure
1R
	4			the days and the time-of-day.
1R
3DU			Par	You specify whether the timer pulses on for one cycle when
				activated and then reset. The pulse setting applies to all three
				cams.
			Output Q	Q is set when the configured cam is actuated.
Symbol in LOGO!			Wiring	Description
0BA7
			Cam parameters	At the Cam parameters, you set the on- and off-times of the
			1, 2 and 3	weekly timer for each Cam switch. Here you also configure
3DU		4		the days and the time-of-day.
				You can also specify whether the timer pulses on for one
				cycle when activated and then reset. The pulse setting
				applies to all three cams.
			Output Q	Q is set when the configured cam is actuated.

Timing diagram (three examples)

&DP          

4

0RQGD\ :HGQHVGD\

7XHVGD\7KXUVGD\

&DP 'DLO\

&DP 7XHVGD\

&DP 6DWXUGD\DQG6XQGD\

)ULGD\6XQGD\ 6DWXUGD\

KWRK KWRK KWRK

LOGO!
Manual, 04/2011, A5E03556174-01	185