Siemens 6ED1050-1AA00-0BE8 manual Setting the time of day and date LOGO! ... C, 6WRS

Configuring LOGO!

7.2 Setting the default values for LOGO!

7.2.1Setting the time of day and date (LOGO! ... C)

You can set the time of day and the date

●in parameter assignment mode by means of the set menu ("Clock" menu item)

●in programming mode by means of the setup menu ("Clock" menu item)

To set the time of day and the date in parameter assignment mode:

1.Select parameter assignment mode (Page 288).

2.On the parameter assignment menu, select 'Set..': Press or

6WRS

6HW3DUDP !6HW 3UJ1DPH

3.Confirm 'Set..': Press OK

4.Move the '>' cursor to 'Clock': Press or

5.Confirm 'Clock': Press OK

6.Move the '>' cursor to 'Set Clock': Press or

7.Apply 'Set Clock': Press OK

Note

The 'Set Clock' command is only executed if your LOGO! is equipped with a real-time clock (LOGO!..C). You set the real-time clock of LOGO! by means of the 'Set Clock' command.

LOGO! shows the following display.

6HW&ORFN 0R

<<<<00'' 

7KHFXUVRULVSRVLWLRQHGRQWKH ZHHNGD\

8.Select the day of the week: Press or

9.Move the cursor to the next position: Press or

10.To change the value: Press or

11.To set the correct time of day, repeat steps 9. and 10.

12.To set the correct date, repeat steps 9. and 10.

13.To confirm your entries: Press OK

LOGO!
Manual, 04/2011, A5E03556174-01	295