Siemens AS 235 appendix Ordering data for ES 100 K, ES 100 K extension, ES 100 K options

This catalog is out of date, see note on page 1

Automation systems

ES 100 K

Ordering data for ES 100 K

Ventilation roof

Ordering data Order No.

ES 100 K extension 6DS2 103 -

820 760	15 U
	15	600 x 360
		630
1 U = 44.5 mm

702

10.2	29
Æ

40

￿	system
	Basic system
	• Extension system AC 230 V	1 X X 0
	• Extension system DC 24 V	2 X X 0
	Housing
	• Without housing	0
	• Sheet-steel housing, degree of	1
	protection IP 21, without heat
	exchanger	Order No.
	ES 100 K options
	Connection of the 1st of max. four ES 100 K systems
	of a link to
	- I/O bus 1(A), address range 0 to 60, or
	- I/O bus 2(B), address range 100 to 160
	2 interface modules for ES 100 K	6DS1 322-8AA
	extension system
	Can be inserted in slot for
	I/O modules in the AS 235 and
￿ES 100 K

Fig. 3/10 ES 100 K extension system, design

Housing

The ES 100 K extension system is installed in a sheet-steel hous- ing with degree of protection IP 21. This corresponds to a stan- dard ordering configuration:

Cable for signal transmission
(max. length	Length 25 m	6ES5 721-0BC50
of a link:	5 m	6ES5 721-0BF00
500 m)	50 m	6ES5 721-0CF00
	100 m	6ES5 721-0DB00
	500 m	6ES5 721-0DF00
Intermediate lengths		See Catalog ST 50

• Sheet-steel housing, degree of

protection IP 21C79451-A3260-A50 Dimensions (HxWxD)

820 mm x 600 mm x 360 mm, without heat exchanger, with

–separate ventilation roof,

–top panel with ventilation slits,

–front door, 600 mm wide, with lock,

–base with screwed-in cable panel,

175 mm deep, front half with ventilation slits

When using the supplied parts set for wall mounting, the dimen- sions are increased as shown in Fig. 3/10.

Cable terminating plug	6ES5 760-1AA11
Can be inserted in interface mod-
ule for ES 100 K, required with last
extension system of a link
In addition when using the
address range 100 to 160:
Interface module for I/O bus 2	6DS1 312-8BB
Connection of 2nd to 4th ES 100 K system
of a link
Required per ES 100 K system:
Interface module for ES 100 K	6DS1 322-8AA
extension system
Can be plugged in slot for I/O
modules of ES 100 K

Also refer to the ordering instructions in the appendix (page 8/2) with information on ordering complete systems and options.

Cable for signal transmission See above

Installation of ES 100 K in standard cabinet if cabinet messages are to be detected

Alarm logic module	6DS1 901-8AA
System documentation
Instruction Manual “ES 100 K
extension system” 1)
– German	C79000-B8000-C124
– English	C79000-B8076-C124

1)Only order separately if the ES 100 K system is not ordered together with an AS 235 K system.

3/22 Siemens PLT 111 · 1999