Siemens AS 235 appendix Explanations for the column Remarks, Explanations for the column Release

This catalog is out of date, see note on page 1

I/O modules

Configuring

Modules which can be used on the I/O bus

Designation	Order No. of	Release	Re-
	module		marks
Analog calculation modules
Analog calculation module	6DS1 715-8BB	≥ 2
		SW:03
Binary calculation modules
Binary calculation module	6DS1 717-8AA	≥ 8	16)
		SW:08
Binary/analog calculation	6DS1 717-8RR	≥ 1
module (max. 31 channels)		SW:3
Binary extension	6DS1 719-8AA	≥ 2	15)
Analog extension	6DS1 720-8AA	= 1	15)
Binary extension	6DS1 719-8RR	≥ 1
(for 6DS1717-8RR)
Coupling modules
Speed controller	6DS1 303-8AA	≥ 9
Field multiplexer FM	6DS1 304-8AA	≥ 6	1)
		SW: 2
	6DS1 304-8BB	≥ 1	1)
		SW: 2
S5-110 coupling	6DS1 310-8AA	≥ 8
	6DS1 310-8AB	≥ 8
S5 coupling, serial	6DS1 318-8AB	≥ 3	1)
		SW: 1
S5 coupling, expansion unit	6DS1 321-8AA	≥ 4
S5 coupling, serial	6DS1 333-8AB	≥ 1
		SW=1
S7 coupling, serial	6DS1 333-8AB	≥ 1	22)
		SW=1
MODBUS coupling	6DS1 333-8AB	≥ 1	3)
(on request)	with M1328-V5	SW=5
I/O bus remote coupling	6DS1 322-8AA	≥ 5	1)	12)
AS - I/O bus - ES 100 K
Coupling of SIPART DR20,	6DS1 325-8AA	≥ 2	2) 3)
TELEPERM D compact
controller
S5 coupling, serial,	6DS1 327-8AA	≥ 4
ET100, EU / I/Os, coupling
module TM-S5
Serial coupling, 4 channels,	6DS1 328-8AA	≥ 2	18)
hardware without firmware
TM/EA coupling, I/O bus	6DS1 312-8BB	≥ 2	10)
Coupling of external computer	6DS1 202-8AB	≥ 5	19)	20)
CS 275 / N-V.24
CP 581 TM interface modules
CP 581 TM communications	6DS1 337-1AD	≥ 1	19) 20)
module	with S5KE,	SW: ...	2)	21)
	S5KS
CP 581 TM-L2 (DP/FDL)	6DS1 341-1AD	≥ 1	19) 20)
	with DP drivers	SW: ...	2)	21)
CP 581 TM-L2 (FMS)	6DS1 341-1BD	≥ 1	19) 20)
	with S5KE,	SW: ...	2)	21)
	S5KS
CP 581 TM FUZZY	6DS1 342-1BD	≥ 1	19) 20)
	with S5KE,	SW: ...	2)	21)
	S5KS

Explanations for the column "Remarks"

1)Earlier release versions not permissible!

2)Special product

3)Not a standard product, no system test carried out

4)Cannot be operated in AS 235 systems with auxiliary driver

5)Application only without interrupt!

6)No application as common alarm module (SF 61)

7)Approved for common alarm modules, the latest product release is required.

8)Note current balance of subrack:

max. 4 A per module, max. 16 A per subrack

9)Combination modules for use in TELEPERM M standard systems and in TELEPERM ME systems. Application in AS 235 extension units only as TELEPERM ME module with slot addressing.

10)AS 235: with release ≥ 2,

AS 235 H and AS 235 K: with release ≥ 1.

11)With AS 235 H: > 5.

12)Observe cycle time for processing with ES 100 K! (delay resulting from cable lengths)

13)Application in ES 100 K not allowed (timing)

14)Connection of transmitters with two-wire system not permissible with AS 235 K and ES 100 K in AC 230 V! The ripple of the power supply in the AS is too high for these transmitters and the connection sys- tem.

15)Module only functions together with 6DS1 717-8AA

16)Only alarm function

17)Module only functions together with 6DS1 713 or 6DS1 731.

18)Only a hardware module; no function in delivered state. For use with standard drivers, the module firmware is usually adapted to existing drivers.

19)A maximum of two modules of type N-V.24 or CP 581 TM are permis- sible in a system (in basic cabinet and extension cabinet)

20)Application in ES 100 K not allowed (5 V power)

21)Hardware/software releases on request:

Siemens Karlsruhe, Dept. ATD TD 4, D-76181 Karlsruhe

22)S7 coupling with 3964 R / RK 512 procedure, SEND/RECEIVE, no FETCH, SIMATIC S5 analog value format

Explanations for the column "Release"

≥5 Tested with AS 235 system technology, no imperative release ver- sion. No negative information with earlier releases.

1; 2; Permissible releases

=5 Valid release of a module

≥6 ≥ and remark 1) mean an imperative minimum release (6 in this case), i.e. upgrading is essential at least up to release 6.

		Observe the respective indexed remarks for the individual
		modules.
4/10	Siemens PLT 111 · 1999	￿