Siemens AS 235 appendix Proportioning and counter modules, STRUK-AS 220 EA configuring program

This catalog is out of date, see note on page 1

I/O modules

Proportioning and counter modules

Proportioning counter module, metering pulse input module

Counter modules

￿Two counter modules are available:

•Proportioning counter module with 2 or 4 channels, 6DS1 613-8BB

For counting and largely autonomous processing of metering pulses, independent of the superimposed automation system. The module can be used for

–proportioning,

–measuring rotational speed and velocity,

–measuring lengths and

–counting pulses.

•Metering pulse input module with 8 channels, 6DS1 607-8AB

Input and addition of 8 metering pulses from contacts or BERO proximity switches with transmitter supply from the module (non-floating).

Configuring

￿STRUK-AS 220 EA configuring program

STRUK-AS 220 EA can be used to configure the configurable I/O modules on a programming device/PC (with MS-DOS oper- ating system). The programming device/PC must be connected

• via a built-in TTY interface and the cable 6DS8 170-8AD to the TTY interface of the I/O module (direct coupling)

or alternatively

• integrated via a local bus interface module N-AT and a cable for 20-m local bus into the CS 275 plant bus (central coupling).

Special requirements for module configuring via the CS 275 plant bus:

• AS 235 system software version G.1 or later

•Vacant user memory (RAM) at least 300 byte (memory is made available again following configuring).

The complete configuration including all application parameters can be stored on diskette and thus loaded into a replacement module if necessary. New settings, and the associated possibil- ity of making mistakes, are therefore unnecessary. The replace- ment module is immediately ready for use.

Ordering data

Proportioning counter module
with 2 or 4 channels
– Module	6DS1 613-8BB
– German Instruction Manual	C79000-B8000-C46
– English Instruction Manual	C79000-B8076-C46
Metering pulse input module,
with 8 channels
– Module	6DS1 607-8AB
– German Instruction Manual	C79000-B8000-C45
￿– English Instruction Manual	C79000-B8076-C45

Ordering data	Order No.
STRUK-AS 220 EA program	6DS5 221-8AX
German/English
STRUK-AS 220 EA User’s Guide
– German	C79000-G8000-C310
– English	C79000-G8076-C310
Direct coupling
Cable	6DS8 170-8AD
to connect a configurable I/O
module to a personal computer,
10 m long
Central coupling
Hardware coupling package
to couple a PC to CS 275, com-
￿prising interface module N-AT,
cable for 20-m local bus and
Instruction Manual in
– German	6DS1 222-1BA10
– English	6DS1 222-1BA20

Coding, inserting and labelling

The I/O modules can be supplied coded, inserted and with labelled slots. Arrangement, designation and connection dia- grams (including address data) are required from the orderer.

￿	Ordering data	Order No.
	Coding, inserting and labelling	6DS5 705-8AA
	for 1 I/O module

4/8 Siemens PLT 111 · 1999