Siemens CP 343-1 manual Identification, Parameter, Version

7 Web Diagnostics

7.2.2Identification

Here, you can see a variety of information on the CP for identification and maintenance.

Parameter

Identification

Function

Plant designation 1)	Plant designation of the CP if this was configured.
Location identifier 1)	Location identifier of the CP if this was configured.
Serial number	Serial number of the CP
Order number	Order number of the CP
Version
Hardware	Hardware version of the module
Firmware	Version of the stored firmware

1)A CP acting as PROFINET IO device can be informed of the plant designation and location identifier by the PROFINET IO controller using the “write data record” function. This is done using the maintenance data record “IM1” with

index AFF1H.

The “write data record” function is explained in detail in the general part A of the manual in the description of the FCs for PROFINET IO.

B3L−36	CP 343-1 Lean for Industrial Ethernet / Manual Part B3L
	Release 03/2007

C79000-G8976-C198-04