Siemens SAMMS-MV Function Number, 5A CT primary current if used Full load current for OLR No

3 Operating the SAMMS-MV Device

		SAMMS-MV
Function Number	Function	SAMMS-MVX	SAMMS-MVE
F0	Ambient temperature	∙	∙
F1	Control circuit number	∙	∙
F2	Size for overload No. 1	∙	∙
F3	Size for overload No. 2 (low speed)	∙
F4	Full load current for OLR No. 1	∙	∙
F4A	5A CT primary current (if used)	∙	∙
F5	Full load current for OLR No. 2	∙
F5A	5A CT primary current (low speed) (if used)	∙
F6	Service factor	∙	∙
F6A	Motor type	∙	∙
F7	Overload trip class (class 2 through 23)	∙	∙
F7A	Cold stall time	∙	∙
F8	Automatic reset	∙
F9	Phase unbalance	∙	∙
F10	Time to restart	∙	∙
F11	Emergency restart	∙	∙
F12	Ground fault protection or warning	∙	∙
F12A	Ground fault pickup current	∙	∙
F13	Timer No. 1	∙	∙
F14	Timer No. 2	∙	∙
F15	Motor current	∙	∙
F16	Last trip current	∙	∙
F17	Percent unbalance current	∙	∙
F18	Total elapsed run-time on motor	∙	∙
F19	Total number of motor starts	∙	∙
F20	Number of overload trips	∙	∙
F21	Reset motor data	∙	∙
F22	Set process current warning	∙
F23	Jam protection	∙
F23A	Jam pickup current	∙
F24	Loss of load protection or warning	∙
F24A	Loss of load pickup current	∙
F25	Motor winding temperature as % of full load temperature	∙	∙
F26	Baud rate	∙	∙
F27	Address	∙	∙

Table 3.7 SAMMS-MV models and functions

27