3Attach the Vent Mount to the
PowerConnect Vehicle Dock using the provided screws..
4Push the Vent Mount onto the
vehicle vent as shown (1) until it hooks on the rear of the vent louver (2)..
5Rest the foot against the
bottom of the vent (2), and adjust the tilt of the Vent Mount by repositioning the foot to a different adjustment hole (3)..
1 | 2 | 3 |
|
| Dash | Dash | Dash |
PUSH |
| HOOKED |
|
|
|
| |
| Vent | Vent | Vent |
| FOOT | TILT |
|
| ADJUSTMENT |
| |
| Louver | HOLES |
|
To remove the Vent Mount, push the mount into the vent.. Then lift up until disengaged from the rear of the vent louver, and remove the Vent Mount..
21
