Vehicle Installation
•Pickup Truck:
1.Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the windshield and tuck the antenna cable underneath it..
2.Continue tucking the cable underneath the windshield molding around the windshield to the lowest corner..
3.At the lowest corner of the windshield, route the cable out of the windshield molding and into the rubber weather stripping around the door opening.. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping.. Run the cable inside of the weather stripping to the bottom of the door opening..
4.Pull the cable out of the weather stripping at the bottom of the door opening and route it under the carpet toward the dashboard.. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls.. Secure the excess cable with wire ties..
5.Bring the end of the cable out at
the PowerConnect Vehicle Dock location.. Leave yourself enough cable so you can easily connect it to the antenna connector of dock..
6.Continue with “Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter” on page 41..
40
