Vehicle Installation

Step 2: Install the Vent or Dash Mount

Depending on your situation, you can either choose to use the Dash Mount or the Vent Mount..

Installing the Dash Mount:

CAUTION! The adhesive used on the Dash Mount may be difficult to remove.. Do not install this mount on leather surfaces (contact your vehicle dealer if you are unsure about your dash surface), and make sure the air temperature is at

least 60°F (15°C) during installation.. If it’s not at least 60°F, turn on the heater in your vehicle to bring the temperature up to 60°F..

1Locate a flat surface for the Dash Mount.. Make sure there is ample room for the PowerConnect Vehicle Dock and Starmate 5 when installed..

2 Set the orientation of the Dash

I

II

 

Mount before adhering it.. Loosen

 

 

the knob and adjust the adhesive

 

 

foot for the location you selected

 

 

in “Step 1: Choose a Location for

 

 

Your Radio” on page 16:

 

 

Option 1 & Option 3 should be oriented

as I..

Option 2 should be oriented as II..

3 Attach the Dash Mount to the PowerConnect Vehicle Dock using the provided screws..

18

Page 18
Image 18
Sirius Satellite Radio SDST5V1 manual Install the Vent or Dash Mount, Installing the Dash Mount