Skil 3700 manual Attaching Digital Display, Attaching Handle To Rip Fence, T18

Attaching Digital Display

Locate the digital display assembly T5 , 3 AA batteries T14, and 2 end caps for the front rail from among the loose parts.

1.Install 3 size AA batteries in the digital display assembly T5 as shown. (Fig. 11)

2.Slide the digital display assembly onto the rail T9 from the right- hand side so that the assembly has captured the profile of the rail. (Fig. 12)

3.Install the rail end caps T24 onto the right and left ends of the rail.

4.Follow instructions on setting and using the digital display in the operation section of this manual.

FIG. 11

AA AA AA

T14

T5

FIG. 12

T24

T5

ON/OFF INCH/MM ZERO

T9

FIG. 13

Attaching Handle To Rip Fence

Locate the rip fence assembly T3 and the rip fence handle T18 (Fig. 13) from among the loose parts.

1.	Thread handle into the rip fence.
2.	Tighten hex jam nut to lock handle against cam (Fig. 13).	T3

IMPORTANT: Apply a coat of paste wax to the top surface and front edge of the front guide rail. This will allow the fence to slide more easily.

T18

46.