29 | CHAPTER 3 – CABLING AN 880i4 OR 885i4 SYSTEM TO A HAWM-UX/UF
4. Place the audio connection cable
through the right speaker cable clip
on the rear of the interactive
whiteboard, toward the right
speaker.
5. Connect the dual channel audio
output to the speaker’s connection
panel, and bundle any excess cable
in the right speaker cable clip.
6. Retrieve the speaker-to-speaker
Molex (double-barreled) cable from
the SBA-L packaging.
7. Place the Molex cable through the
left speaker cable clip, through the
space between the HAWM-UX/UF
and the interactive whiteboard.
8. Place the cable through the right
speaker cable clip.
9. Connect the Molex cable to both
speakers, and bundle any excess
cable in the left speaker cable clip.
Right speaker
cable clip
Left speaker
cable clip