42 | CHAPTER 4 – CABLING A 685ix OR D685ix SYSTEM TO A HAWM-UX/UF
2. Place the WMB
through the
cable
management
clip located
under the
projector. Make
sure the WMB’s
strain relief sits
above the clip
point.
3. If the ECP is
mounted on the left,
place the WMB
around the back of the
HAWM-UX/UF’s
interactive whiteboard
brackets, toward the
left side of the
interactive
whiteboard. If the
ECP is mounted on
the right, place the
WMB around the back
of the HAWM-UX/
UF’s interactive
whiteboard brackets,
toward the right side
of the interactive whiteboard.
4. Place the WMB through the top cable clip you installed on the side of the
HAWM-UX/UF.