70 | CHAPTER 6 – CABLING A 600I3 OR D600I3 SYSTEM TO A HAWM-UX/UF
7. Retrieve the four plastic anchors and four screws supplied for mounting the ECP,
from the SMART UF55 or SMART UF55w projector packaging. Using a hammer,
drive the plastic anchors into the wall at the four drill hole locations.
8. Attach but don’t tighten, two screws in the two top plastic anchors using a Phillips
No. 2 screwdriver. Leave a 1/8" (3 mm) gap between the screw and the anchor.
9. Attach the ECP to the
screws, using the top
two key holes on the
ECP.