72 | CHAPTER 6 – CABLING A 600I3 OR D600I3 SYSTEM TO A HAWM-UX/UF
IMPORTANT
Use only the input Computer 1 on your projector to connect the ECP harness
cable.
Number Function
1 RCA jack audio left/right input (reserved for ECP harness cable)
2 S-video input connector (reserved for ECP harness cable)
3 RCA jack audio left/right input (reserved for ECP harness cable)
4 RCA jack composite video input connector (reserved for ECP harness
cable)
5 3.5 mm audio output connector (for VGA 2-In connector)
6 HD-DB15 (VGA 2) connector (reserved for ECP harness cable)
7 3.5 mm audio output connector (for VGA 1-In connector)
8 HD-DB15 (VGA 1) connector (computer analog signal/component video
input)
9 HD-DB15 VGA output connector
10 Power socket
11 RS-232 connector (reserved for ECP harness)
12 RJ45 jack (for network connections)
5 7
2
1031 11
6 8 9 124