78 | CHAPTER 6 – CABLING A 600I3 OR D600I3 SYSTEM TO A HAWM-UX/UF
To connect your host
computer’s audio and
video output to the ECP
1. Make sure you ha ve a VGA and 3.5 mm audio cables (not included) long enough
to connect your computer to your ECP.
2. Connect the VGA and 3.5 mm audio cables to the VGA and 3.5 mm input
connector on the bottom of your ECP.
3. Connect the other end of your the VGA and audio cables to the VGA and audio
input on your computer’s video output connector.
Using the SMART UF55 and SMART UF55w projectors’ ECP for remotely mounted components
The following diagram and list identify the SMART UF55 and SMART UF55w
projectors’ connections to components that don’t mount to the HAWM-UX/UF.
Number Function
1 RS-232 connector
2 HD-DB15 (VGA) connector
3 3.5 mm audio output connector (reserved for VGA connector)
4 S-video input connector
5 RCA jack audio left/right input (reserved for S-video connector)
6 RCA jack composite video input connector
7 RCA jack audio left/right input (reserved for composite video connector)
1
3 5 6 72 4