Smart Inventions HAWM-UX/UF

55 | CHAPTER 5 – CABLING A 600I4 OR D600I4 SYSTEM TO A HAWM-UX/UF

Using the SMART UF65 and SMART UF65w projector ECP

for HAWM-UX/UF-mounted components

The following diagram and list identify the ECP ports that connect to

HAWM-UX/UF-mounted components.

Connecting your SMART UF65 or SMART UF65w projector’s

ECP harness cable

The ECP harness cable controls all signals and commands sent between the ECP

and the projector. Choose a side of the interactive whiteboard to install your ECP on,

and then follow the instructions in the SMART Board 600i4 and D600i4 Interactive

Whiteboard System Configuration and User’s Guide (smarttech.com/kb/146184).

Number Function

1 USB B jack (reserved for the primary computer)

2 DB15 ECP connector (reserved for ECP harness cable)