SMC Networks EX500-GEN1 EX9-PE1 power supply connector No.0, EX9-PE1 power input connector No.1

Wiring ( continued )

Power supply wiring

When combining EX9-OEP1 ( or EX9-OEP2 ) and EX9-PE1 and using external power supply, connect the power supply to the power input connector of EX9-PE1.

When selecting power supply, refer to "Handling precautions" ( page 3 ) in this manual.

EX9-PE1 power supply connector No.0

M12, 5-pin, reverse key, socket

Note Keep the waterproof cap mounted on power supply connector No.0 while using

Pin alignment and connection drawing of the Power Supply Cable

48.1

M126.4 φ

30 5

50

EX9-PE1. This connector is prepared supplementarily and not used normally.

EX9-PE1 power input connector No.1

M12, 5-pin, reverse key, plug

	2	1	1	2
	5			5
	3	4	4	3
	Power input		Power supply
	connector No.1		connector No.0
Pin No.	Power input connector No.1			Power supply connector No.0
1	Power supply for output devices ( 24VDC )			Power supply for output devices ( 24VDC )
2	Power supply for output devices ( 0V )			[ Power supply for output devices ( 0V ) ]
3	[ Power supply for sensor ( 24VDC ) ]			[ Power supply for sensor ( 24VDC ) ]
4	[ Power supply for sensor ( 0V ) ]			[ Power supply for sensor ( 0V ) ]
5	Ground			[ Ground ]

Note : Each signal of connector No.0 is connected to corresponding signal of connector No.1. The pins whose applications are shown in brackets [ ], are prepared supplementarily and not used normally.

	EX9-AC -1
Pin No	Cable color : Signal name
1	Brown : Power supply for output ( 24VDC )
2	White : Power supply for output ( 0V )
3	Blue : [ Power supply to sensor ( 24VDC ) ]
4	Black : [ Power supply to sensor ( 0V ) ]
5	Gray : Ground ( PE )

12

5

43

Socket connector pin layout ( Reverse key )

36 37