Installing an SFP Transceiver | SMC Networks SMC6826MPE specs

INSTALLING THE SWITCH

Installing an SFP Transceiver

22	23
	23	24
		24

23

24

Link/Act	Pwr

PoE	Diag

25RPS

26Stack

Mode

PoE /Link

Figure 3-5 Installing an SFP Transceiver

The SFP slots support the following optional SFP transceivers:

•1000BASE-SX

•1000BASE-LX

•1000BASE-LH

To install an SFP transceiver, perform the following steps:

1.Consider your network and cabling requirements to select an appropriate SFP transceiver type.

2.Insert the transceiver with the optical connector facing outward and the slot connector facing down. Note that SFP transceivers are keyed so they can only be installed in one orientation.

3.Slide the SFP transceiver into the slot until it clicks into place.

Note: SFP transceivers are hot-swappable. The switch does not need to be powered off before installing or removing a transceiver. However, always first disconnect the network cable before removing a transceiver.

Note: SFP transceivers are not provided in the switch package.

3-8

Image 48

SMC Networks SMC6826MPE manual Installing an SFP Transceiver

Contents

TigerStack III 10/100 Page TigerStack III 10/100 Installation Guide Trademarks Limited Warranty Limited Warranty Compliances FCC Class aIndustry Canada Class a Japan Vcci Class a CE Mark Declaration of Conformance for EMI and Safety EEC AC/DC Line to Line ±1 kV, AC/DC Line to Earth ±2 kV Safety Compliance Power Cord SafetyAustralia AS/NZS 3548 1995 Class a Iii Power Cord Set Schuko Europe Environmental Statement PurposeVii Audience Related PublicationsViii Table of Contents Making Network Connections Appendices Tables Xii Figures Xiii Xiv Figures Chapter About Overview Switch Architecture Power-over-Ethernet Capability Network Management Options Description of Hardware 10/100BASE-T Ports1000BASE-T/SFP Ports Port and System Status LED Indicators Port Status LED Indicators LED System LED Indicators System Status LED Indicators Stack Master Button Stack Master Button Mode PoE/Link Button Optional Stacking Transceiver Features and Benefits Power Supply SocketsConnectivity Expandability Performance Management Introduction to Switching Chapter Network Planning Application Examples Supplying PoE Collapsed Backbone Collapsed Backbone Network Aggregation Plan Network Aggregation Plan Remote Connections with Fiber Cable Remote Connections with Fiber Cable Making Vlan Connections Making Vlan Connections Application Notes Network Planning Installing the Switch Selecting a Site Ethernet Cabling RJ-45 Connections Equipment Checklist Package ContentsOptional Rack-Mounting Equipment Mounting Rack Mounting Attaching the Brackets Montage Rack Mounting Instructions German Desktop or Shelf Mounting Attaching the Adhesive Feet Installing an SFP Transceiver Installing an SFP Transceiver Stacking Switches Installing a Stacking Transceiver Connecting Switches in a Stack Connecting Switches in a Stack Stacking Switches Connecting to a Power Source Power Socket Connecting to the Console Port Wiring Map for Serial CableSerial Cable Wiring Stop bit-One Data bits-8 Flow control-none Connecting Network Devices Chapter Making Network ConnectionsTwisted-Pair Devices Power-over-Ethernet Connections Connecting to PCs, Servers, Hubs and Switches Cabling Guidelines Network Wiring Connections Network Wiring Connections Fiber Optic Devices Connectivity Rules Making Fiber Port Connections 1000BASE-T Cable Requirements Mbps Gigabit Ethernet Collision DomainMaximum 1000BASE-T Gigabit Ethernet Cable Length Maximum 1000BASE-SX Gigabit Ethernet Cable Lengths Cable Labeling and Connection Records Mbps Fast Ethernet Collision DomainMbps Ethernet Collision Domain Making Network Connections Appendix a Troubleshooting Diagnosing Switch IndicatorsTable A-1 Troubleshooting Chart Power and Cooling Problems Diagnosing Power Problems with the LED IndicatorsTable A-2 Power/RPU LED Indicators Installation In-Band Access Stack Troubleshooting Appendix B Cables Twisted-Pair Cable and Pin Assignments 10/100BASE-TX Pin Assignments Table B-1 10/100BASE-TX MDI-X and MDI Port Pinouts Straight-Through Wiring Figure B-2 Straight-through Wiring Crossover Wiring Figure B-3 Crossover Wiring 1000BASE-T Pin Assignments Cable Testing for Existing Category 5 Cable Table B-2 1000BASE-T MDI-X and MDI Port Pinouts Adjusting Existing Category 5 Cabling to Run 1000BASE-T Fiber Standards Cables Appendix C Specifications Physical Characteristics Switch Features Management Features StandardsIn-Band Management Out-of-Band Management Safety CompliancesEmissions Immunity Table D-1 TigerStack III 10/100 Products and Accessories Appendix D Ordering Information Ordering Information Glossary Glossary-11000BASE-T Glossary-2 Glossary-3 Glossary-4 Glossary-5 Glossary-6 Index Index-1 Index-2 Index-3 Index-4 Page For Technical SUPPORT, Call