43
OPERATIONAL DESCRIPTION
MAXIMUM GUARANTEED RATINGS*
Operating Temperature Range........................................................................................0oC to +70oC
Storage Temperature Range...................................................................................... -55oC to +150oC
Lead Temperature (soldering, 10 seconds).............................................................................. +325 oC
Positive Voltage on any pin, with respect to ground ...............................................................VDD+0.3V
Negative Voltage on any pin, with respect to ground.................................................................... -0.3V
Maximum VDD ...............................................................................................................................+7V
*Stresses above those listed may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other condition above those indicated in the
operational sections of this specification is not implied.
NOTE: When powering this device from laboratory or system power supplies, it is important that the
Absolute Maximum Ratings not be exceeded or device failure can result. Some power supplies exhibit
voltage spikes or "glitches" on their outputs when the AC power is switched on or off. In addition,
voltage transients on the AC power line may appear on the DC output. If this possibility exists it is
suggested that a clamp circuit be used.
DC ELECTRICAL CHARACTERISTICS
VDD=5.0V±10%
COM20020: TA=0oC to +70oC, COM20020I: TA=-40oC to +85oC
PARAMETER SYMBOL MIN TYP MAX UNIT COMMENT
Low Input Voltage 1
(All inputs except A2,
XTAL1, nRESET, nRD,
nWR, and RXIN) High
High Input Voltage 1
(All inputs except A2,
XTAL1, nRESET, nRD,
nWR, and RXIN)
VIL1
VIH1 2.0
0.8 V
V
TTL Levels
TTL Levels
Low Input Voltage 2
(XTAL1)
High Input Voltage 2
(XTAL1)
VIL2
VIH2 4.0
1.0 V
V
TTL Clock Input
Low to High Threshold
Input Voltage (A2,
nRESET, nRD, nWR,
RXIN)
High to Low Threshold
Input Voltage (A2,
nRESET, nRD, nWR,
RXIN)
VILH
VIHL
1.8
1.2
V
V
Schmitt Trigger,
All Values at VDD =
5V