STEP 10: Make a Data Call
Preliminary Checklist
#Is the DPC properly inserted into the mobile computer and connected securely to the phone?
#Is the phone receiving a digital signal? A 
or equivalent will appear on the display of some phones.
#Is the mobile phone’s signal strength sufficient? A minimum strength of two bars is recommended, but some phones can send data with one. For a better signal, raise the antenna, hold the phone upright, and/or relocate.
#Does your phone have enough battery power for your data call?
Placing a Data Call
1.Windows 2000 — Go to My Computer Control Panel Network and Dial- up Connections.
Windows XP — Go to Start Control Panel Network Connections.
2.Make sure the correct User Name and Password are entered. Verify the other dialing information, and click Dial.
Note: If you select the Save password option, the information will be saved only after you click Dial.
Connect screen | Dialing status screen |
3.When the computer starts calling, you should see the call status on both the computer screen and phone display.
4.When connected, the status screen will report that you are successfully connected, and a connection icon will appear in the task tray.
CHAPTER 6: WINDOWS 2000/XP SETUP 43
