Socket Mobile Digital Phone Card for Data-Capable Mobile Phone manual Windows 9x/Me Setup

Chapter 5 Windows 9x/Me Setup

This chapter explains Steps 5-10 for Windows 9x/Me notebooks. Before starting Steps 5-10, be sure to complete Steps 1-4, covered in Chapter 2: Preliminary Setup. This chapter shows Windows 98 screens. Windows 95/Me screens will be formatted differently but functionally equivalent. Any significant differences will be noted.

STEP 5: Insert the Installation CD

Insert the installation CD into the CD drive of your notebook computer.

STEP 6: Insert the Card and Attach the Phone

1.Plug the DPC into the PC Card adapter, with the purple label on top. Do NOT insert the DPC upside down, or damage may occur.

Insert the DPC into the adapter with the card’s colorful label on top.

2.With the notebook computer turned ON, insert the combined unit into the PC Card slot. Windows notebooks in most cases will signal that the DPC has been properly inserted via a beep, task tray icon and/or message screen.

3.Connect the free end of the data cable to the data part of the mobile phone. The data port is typically on the bottom or side of the mobile phone and usually is the same port used to charge the phone.

28 CHAPTER 5: WINDOWS 9x/Me SETUP