•lfyou change the HDMI connection, connect and
disconnect the AC power cord (mains lead), or
have a power failure,set the[HDMI CONTROL]
settingin [CUSTOM SETUP] to [OFF], then set
the [HDMI CONTROL] setting in [CUSTOM
SETUP] to [ON] (page 90).
• For details onthe HDMI CONTROL function, see
the HDMI CONTROL Guide (supplied
separately).
No sound is output from the system and TV
while using the System Audio Control
function.
• Set the IAUDIO (HDMII] setting in ICUSTOM
SETUP] to [ON] (page 91).
• Make sure that the connected TV is compatible
with the System Audio Control function.
• For details onthe System Audio Controllimction,
seethe HDMI CONTROL Guide (supplied
separately).
(When letters/numbers appear in thedisplay)
When the self-diagnosis function is activated to
prevent the system lix)m malt_mctioning, a 5=
character service number (e.g., C 13 50) with a
combination of a letter and 4 digits appears on
the TV screen ort>ont panel display. In this case.
check the following table.
First 3
characters of
the service
number
_,C: li3:5_'_
Causeand/or corrective action
C 13 Thedisc isdirty.
,,,,l_Cleanthe disc with a soft cloth
(page96).
C31 The disc is not inserted correctly.
,,,,l_Restartthesystem, thenre-insert
thedisc con'ectly.
E XX Toprevent a mallilnction, the
(xx isa number) system has perlk_rmedthe self-
diagnosis flmction.
,,,,l_Contactyour nearest Sony
dealer or local authorized Sony
sel_.icefacility and give the 5-
character ser'.ice ntlnlber.
Example: E 61 10
When displaying the version
number on the TV screen
When you turn on the system, the version
number [VER.X.XX] (X is a number) may
appear on the TV screen. Although this is not a
malfmlction and for Sony service use only,
normal system operation will not be possible.
Turn off the system, and then turn on the system
again to operate.
100Us