@ _ li(_
b :
÷1,1.1÷,_',
MENU
After coimecting the AC power cord (mains
lead), the demonstration appears in the f'ronl
panel display. When you press I/(_)on the
remote, the demonstration turns olT.

Setting the demonstration

mode to on/off

1
2Press SYSTEM MENU.
Press ,I,/4,repeatedly until "DEMO"
appears inthe front panel display, then
press Qor -).
Press '1'/4, to select a setting.
The default setting is underlined.
"DEMO ON": sets the demol]stration
illode toon.
• "DEMO OFF": sets the demonstration
mode to off.
4Press Q.
The setting ismade.
5 Press SYSTEM MENU.
The system menu turlis ofl.
O
O

_=.

_Q
D.
I
Z
O
m
121
I
When you press I/_ on the uniLthe demonstration
does not turn oil.
When you set the demonstration mode inthe system
menu tOon, the demonstration doesnot turnoff even
though you press |1(_)onthe remote. Toturn offthe
demonstration, setthe demonstration modeto off,
Ihen press |/(_) on Iheremote. When the
demonstration mode isset to off, the system saves
power in standby mode.
•If thesystem is at its factoWdefault settings (ex.after
performing <<COLDRESET" (page 94))>youcan turn
off the demonstration simply by pressing|/(_) on Ihe
remote. Otherwise, tostop the demonstration, you
need to set "DEMO"to "DEMO OFF."
27us