Sony DA V-HDX5OO operating instructions G7us

protection) compliant ("HDMI" on the front panel does not light up). See page 110.

•If the HDMI OUT jack is used for vide() output, changing the type of video signal output from the HDMI OUT jack by pressing VIDEO FORMAT rely solve the problem (plge 31).

Connect the TV and Ihe unit using a vide() jack other than the HDMI OUT, and switch the TV_s

input to the connected vide() input so that you can see the on-screen displays. Change the type of video signal output from the HDMI OUT.iacL and switch the TV's input back to HDMI. If the picture still does not appear, repeat the steps and try other options.

•You have selected "PROGRESSIVE" using the VIDEO FORMAT button on the remote

/"PROGRE" lights up in the front panel display) even though your TV cannot accept the

progressive signal. In this case. disconnect the HDMI cord from the unit and then select

"INTERLACE" so that "PROGRE"turns off.

•lfthe signal flom the S VIDEO OUT jack is distorte& change the type of video signal output from the HDMI OUT jack by pressing VIDEO FORMAT to [720 x 480p]" (page 31).

"Depending on the country, [72(}x 576p] may appear.

Picture noise appears.

•The disc is dirty or Ila_ed.

•If the picture output from your system goes through your VCR to get to your TV, the copy- protection signal applied to some DVD programs could affect picture quality. If you still experience problems even when you connect your unit directly to your TV, try connecting your unit to your TV's S vide() input (page 3(1).

Even though you set the aspect ratio in [TV

TYPE] of [SCREEN SETUP], the picture does not fill the TV screen.

• The aspect ratio on the disc is fixed.

Color irregularity occurs on the TV screen.

The subx_oofcr and the front speakers in this system are magnetically shielded to prevent magnetic

leakage. However, some leakage may occur, as a high-strength magnet is employed. If this happens, check the following items:

•If the speakers are used with a CRT-basedTV or pr(_jector, install the speakers at least 0.3 meters / 1.0 fl) from the TV set.

•lfthe color irregularity persists, turn off the TV set once, then turn it on after 15 to 30 minutes.

•If howling occurs, reposition the speakers farlher away from the TV set.

•Make sure that no magnetic object (magnetic latch on a TV stand, heahh care device, toy, etc.) is placed near the speakers.

Sound

There is no sound.

•The speaker cord is not connected securely.

•Press MUTING on the remote if"MUTING ON" is displayed in the front panel display.

•The system is in pause mode or in Slow-motion

Play mode. Press 1:::>to return to normal play

n/ode.

•Fast forward or fast reverse is perfonned. Press [2:>-to return to normal play mode.

•Check Ihe speaker settings (page 92).

•The equipment connected to the HDMI OUT jack does not conform to the audio signal fommt, in this case set [AUDIO/HDMI)] in [CUSTOM gETUP[ to [ON] (page 91).

No sound is output from the HDMI OUT jack.

•Set [AUDIO (HDMI)I in [CUSTOM SETUPI to [ON] (page 91 ).

•The HDMI OUT jack is connected to a DVI (digital visual interface) device (DVI (digital visual interface)jacks do not accept audio signals).

D.

• T U the following: (_) Turn the system oft"and on D. again. @ Turn the connected equipment off and

on again. @ Disconnect and then connect the HDMI cord again.

The left and right sounds are unbalanced or	a"
reversed.

•Check Ihat the speakers and components are connected correctly and securely.

There is no sound from the subwoofer.

•Check the speaker connections and settings (page 19, 92).

•Set the sound field to "A.F.D. STD" (page 42),

Severe hum or noise is heard.

•Check that the speakers and components are connected securely.

•Check that the connecting cords are away from a transformer or motor, and at least 3 meters ( 10 It) away from your TV set or a fluorescent light.

•Move your TV away from the audio components.

•The plugs and.jacks are dirty. Wipe Ihem with a cloth slightly moistened with alcohoh

•Clean the disc.

continued_

g7us