Location and Function of Parts and Controls

5 ADJUST (PUSH ENTER) knob Used for menu operations. Select a menu by turning the knob and execute by pressing the knob.

When the SLATE function is on, this switch acts as the slate signal output button.

6 Slate microphone

This built-in condenser microphone is activated when the ADJUST knob is pressed.

For detailed information on how to output voice from the microphone, see “To output the voice from the microphone or a 1-kHz reference signal” on page 10.

3 Power switch

Turns the power on or off.

When the power is on, the external power supply is selected automatically when the power is supplied externally. If the internal batteries are inserted, the power supply is not interrupted even if you disconnect and re-connect the external power supply. Also, you can change the internal batteries without interrupting operations when you use the external power supply.

4 LEVEL control

Adjusts the headphones volume level.

5 PHONES connector (stereo phone jack)

Connects the headphones. The same signal as the one from the PHONES connector located on the right side of the unit is output.

The signal to be output depends on the setting of the 6 Headphones monitor mode switch.

6 Headphones monitor mode switch

Selects the signal to be monitored through the headphones.

L/R: Outputs the Left signal of the master output signal to the Left channel and the Right signal to the Right channel as stereo.

L+R: Outputs a mixed signal of the master output signal to both Left and Right channels as mono.

L:Outputs the Left signal of the master output signal to both Left

and Right channels.

R:Outputs the Right signal of the master output signal to both Left and Right channels.

M-S:Outputs the M/S decoded signal to the PHONES connector. Select this position when the M-S (Mid- Side) microphone is used and only the output signal to the PHONES connector is to be decoded.

CAMERA: Outputs the signal from the camcorder input to the CAMERA connector located on the right side.

7 Output section

1 PEAK indicator

2 MASTER LINK switch

3 L/R MASTER volume control

12