5.CH LINK/M-S Sub- Menu

This menu allows you select whether input channels 1 and 2 or channels 3 and 4 are set to LINK mode or M-S mode independently.

5. CH LINK/M-S sub-menu
6.INPUT LIMITER Sub- Menu

This sub-menu allows you to set the threshold level of the limiter for each channel.

6. INPUT LIMITER sub-menu

Turning the ADJUST knob to the right changes the setting item in the following sequence: CH1-2 t CH3-4.

Turning the ADJUST knob to the right changes the selection in the following sequence: LINK t M-S t REV M-S.

Default setting: LINK

Selection

Function

 

 

LINK

Channels 1 and 2 or channels

 

3 and 4 are set to link mode

 

and linked as stereo. Switches

 

and controls of channel 1 or

 

channel 3 are activated and

 

those of channel 2 and

 

channel 4 are disabled.

 

 

M-S

Selects when the MS

 

microphone is used. Channels

 

1 and 2 or channels 3 and 4

 

are set to M-S mode. The input

 

level control of channel 1 and

 

channel 3 acts as the input

 

level control of those channels

 

and the input level control of

 

channels 2 and 4 acts as the

 

phase adjust knob.

 

 

REV M-S

Used when the MS

 

microphone is placed upside

 

down. In this mode, even if the

 

MS microphone is placed

 

upside down, the right and left

 

signals are not reversed.

 

 

Turning the ADJUST knob to the right changes the setting item changes in the following sequence: CH1 t CH2 t CH3 t CH4.

Turning the ADJUST knob to the right or left increases or decreases the set value between OFF, 0 and -20 dBFS in units of 2 dB.

Default threshold level

CH1 to CH4: OFF

Display of the threshold level

When the dBFS meter is selected on the 11. METER SELECT sub menu, the threshold level is displayed in the unit of dBFS.

The adjustable range: Between OFF,

0 and –20.

When the meter other than the dBFS meter is selected, the threshold level is displayed in the unit of dB.

The adjustable range: Between OFF,

+20 and 0.

29