Settings from the Setup Menu

To move to another sub-menu

1 When the cursor blinks beside the setting item just set, turn the ADJUST knob to the left until the return mark to the left of the top setting item appears and blinks.

2 Press the ADJUST knob. The sub-menu appears.

3 Turn the ADJUST knob to the left or right until the desired sub-menu appears, and then press the ADJUST knob.

When you cannot enter the setting mode from the sub-menuThat sub-menu has been locked to prevent misoperation using 9. PARAMETER LOCK sub-menu. To perform settings on that sub-menu, unlock it using the 9. PARAMETER LOCK sub-menu.

LOCK blinks.

For details, see “9. PARAMETER LOCK Sub-Menu” on page 31.

1.SCENE RECALL Sub- Menu

Recalling a scene

1 Turn the ADJUST knob until the

1.SCENE RECALL sub-menu appears, and then press the ADJUST knob.

The scene currently recalled is enclosed in parentheses.

Note

If parameters included in the currently recalled scene are changed using a sub-menu, the parentheses disappear from the currently recalled scene indicator.

2 Turn the ADJUST knob until the scene number to be recalled blinks.

Turning the ADJUST knob to the right changes the scene number in the following sequences: SCENE 0 t SCENE 1 t SCENE 2

......SCENE 8 t SCENE 9 t

DEF.

Turning the ADJUST knob to the left changes the scene number in the reverse order.

3 Press the ADJUST knob. The scene selected in step 2 is recalled. This recalled scene number is enclosed in parentheses.

26