Miscellaneous
Battery life
When the multi meter mode of the LCD is selected, the battery condition is shown on the LCD.
To check the pwoer remaining in the internal batteries
Shows the power remaining in the eight LR6 (size AA) alkaline batteries.
When the amount of power remaining in the batteries is low, the battery indication on the LCD starts flashing. Replace the batteires with new ones, or use the external battery.
For details, see “When the internal batteries run low” below.
To the check the power remaining in the external battery
The power remaining is shown by the numerical value.
The power voltage input to the DC IN 10 - 15 V connector is shown on the LCD.
The battery designed for a camcorder, such as a lithium ion battery, is shut down around 10 V. The numerical value starts flashing when the battery power decreases to less than 10 V. Replace the external battery or use the internal batteries.
For details, see “When the external battery runs low” below. When the external battery is equipped with a battery indicator, check this battery indicator, too.
When the external battery runs low
When internal batteries are loaded in the battery compartment, disconnect the DC cable of the external battery. The power is automatically supplied from the internal batteries.
When the internal batteries run low
Before removing the battery pack, connect the DC cable of the external battery to the DC IN 10
40