Manuals / Brands / Musical Instruments & Equipment / Music Mixer / Sony / Musical Instruments & Equipment / Music Mixer

Sony DMX-P01 Default setting: LOCK, 10.PANEL LOCK Sub- Menu, 10. PANEL LOCK sub-menu, 11.METER SELECT Sub-Menu, 11. METER SELECT sub-menu, Settings from the Setup Menu

1 49

Download 49 pages, 785.6 Kb

Settings from the Setup Menu

10.PANEL LOCK Sub- Menu

When the FUNCTION switch is set to LOCK, all of or some of the switches and controls on the front panel are locked and you cannot operate them. This sub-menu allows you to decide which switches and controls should be locked, from among the input level control, PAN control, LCF switch, L/ R MASTER output level control, LINK/M-S switch, and MASTER LINK control.

10. PANEL LOCK sub-menu

Turning the ADJUST knob to the right changes the setting item in the following sequence: IN VOL t PAN t LCF t IN LINK t OUT VOL t OUT LINK.

Turning the ADJUST knob to the right changes the selection in the following sequence: LOCK t UNLOCK.

Default setting: LOCK

11.METER SELECT Sub-Menu

This sub-menu allows you to select the level meter to be displayed on the LCD from among 6 types of meter, VU, PPM1, PPM2, PPM3, PPM4 and dBFS.

The dBFS meter is the default. When you change the type of meter displayed using this sub-menu, you should replace the meter scale sheet with the one corresponding to the new meter.

For detailed information on the supplied meter scale sheets, see “Replacing a Meter Scale Sheet” on page 41.

11. METER SELECT sub-menu

Turning the ADJUST knob to the right changes the selection in the following sequence: VU t PPM1 t PPM2 t PPM3 t PPM4 t dBFS.

The type of the meter currently being displayed is surrounded by parenthesis.

Note

The following table shows the relationship between the meter displayed on the LCD and the meter type.

32

Contents

DMX-P01 Owner’s Record For the customers in the U.S.A For customers in Canada For the customers in Europe Voor der Klanten In Nederland Table of Contents Overview High quality audio signal processing 4 microphone/line inputs/2 balanced outputs Digital cascade LCD panel for various displays and easy setup Precautions Using the CD-ROMManual Trademarks Location and Function of Parts and Controls OFF: A, B: 4 Input gain control 5 LINK/M-Sswitch When the switch is set to Location and Function of Parts and Controls When M-Sis selected on the 5. CH LINK/M-S sub-menu; The unit is in M-Smode 2 Digital function section 1 LIGHT switch 2 SLATE switch Only activates when the When you press the knob and release it instantly: 4 FUNCTION switch LOCK: SETUP: DISPLAY: 6 Slate microphone 3 Power switch 4 LEVEL control 5 PHONES connector (stereo phone jack) 6 Headphones monitor mode switch 1 PEAK indicator Left Panel 1 Battery compartment Accommodates eight LR6 (size AA) alkaline batteries 2 DC OUT connector (4-pin,female) MIC +48V: Right Panel 1 PHONES connector (3.5 mm TRS jack) 2 Analog output section 1 ANALOG OUTPUT L/R (analog signal output) connectors (XLR type 3-pin,male) 3 LEVEL (output level select) switch 4 TAPE OUT (analog signal output) connector (3.5mm TRS jack) 3 Digital output section 1 AES/EBU (AES/EBU signal output) connector (XLR type 3-pin,male) 2 SAMPLING RATE (sampling frequency select) switch 3 COAXIAL (digital signal output) connector (Phono jack) 4 DC IN 10 - 15 V (external power input) connector (DC jack type) 5 DC IN 10 - 15 V (external power input) connector (XLR type 4-pin,male) 6 STEREO/MONO (stereo/mono select) switch Connections Cascade Connection Display in the Display Mode About the display mode Input level meter Input level meter for channels 1 and 2: Information Input level meter for channels 3 and 4: Level meter display when the slate signal is output: Settings from the Setup Menu Page Settings from the Setup Menu Basic Menu Operation To select the setting: To increase or decrease the set value: While adjusting the value: Recalling a scene Storing a scene 3.CAMERA RETURN Sub-Menu 4. LCF Sub-Menu 4. LCF sub-menu Default frequency for the low cut filter Available frequencies 5.CH LINK/M-SSub- Menu 5. CH LINK/M-S sub-menu 6.INPUT LIMITER Sub- Menu 6. INPUT LIMITER sub-menu Default setting: LINK 7.OUTPUT COMP L Sub-Menu/8.OUTPUT COMP R Sub-Menu 7.OUTPUT COMP L sub-menu 8.OUTPUT COMP R sub-menu Display of the threshold level and limiter The adjustable range of the threshold level: Between OFF, –10and –40 9.PARAMETER LOCK Sub-Menu 9.PARAMETER LOCK sub- menu Default setting: UNLOCK For locked sub-menus 10.PANEL LOCK Sub- Menu 10. PANEL LOCK sub-menu Default setting: LOCK 11.METER SELECT Sub-Menu 11. METER SELECT sub-menu Default setting: dBFS 12.HOURS METER Sub- Menu 12. HOURS METER sub-menu 13.POWER ON MODE Sub-Menu 13. POWER ON MODE sub-menu Using the Unit to a Camcorder Checking the Status of a Connection When connecting with a +4 dBu reference output level: When connecting with a –60dBu reference level: Using the Unit to a Camcorder When the marker is located on the left side of the center marker: When the maker is located on the right side of the center marker: To return to the setup menu Messages stating the results of check Miscellaneous About the spare battery compartment Battery life Replacing a Meter Scale Sheet Troubleshooting Page Pin Assignments of Connectors INPUT connector ANALOG OUTPUT connector CAMERA connector DC IN V connector DC jack DC OUT connector Specifications General Input/output Audio characteristics Supplied accessories Block Diagram