Symptom

Possible causes

Remedies

 

 

 

An impression of stereo

The S side of the MS

Connect the M side to channel

sound cannot be obtained.

microphone is connected to

1 or 3 and the S side to

even when an MS

channel 1 or channel 3, and

channel 2 or 4.

microphone is used.

the M side is connected to

 

 

channel 2 or channel 4.

 

 

 

 

 

LINK/M-S is set to LINK on the

Change the LINK/M-S setting

 

LINK/M-S sub-menu.

to M-S on the LINK/M-S sub

 

 

menu.

 

 

 

Sound is not output from the

A monaural earphone is

Use stereo headphones or

R channels of the

connected to the other

earphones.

headphones.

PHONES connector.

 

 

 

 

The sampling rate cannot

The unit was not restarted

Restart the unit after you

be switched.

when the SAMPLING RATE

change the sampling rate. The

 

switch setting was changed.

setting of the SAMPLING

 

 

RATE switch is switched only

 

 

when the unit is restarted.

 

 

(page16)

 

 

 

The MASTER volume does

The S/PDIF/CASCADE switch

Set the switch to S/PDIF. The

not activate to adjust the

is set to CASCADE.

CASCADE function is used

level of the signal output

 

only when two DMX-P01s are

from the COAXIAL

 

connected in cascade. In this

connector.

 

case, the MASTER volume

 

 

control does not activate.

 

 

(page 16)

 

 

 

43