When you change the meter displayed using the 11. METER SELECT sub- menu, you have to replace the meter scale sheet with the corresponding one.
As the factory setting, the dBFS meter is selected and the meter scale sheet for the dBFS meter is attached to the unit.
To change a meter scale sheet, proceed as follows.
1 Loosen the screws located at both sides of the acrylic panel of the LCD, and push either side of the panel.
The other side of the panel pops up.
Use a screw driver of the #1+ size.
2 Remove the acrylic panel.
3 Remove the meter scale sheet from the inside of the acrylic panel, and insert the corresponding meter scale sheet.
The type of meter is written at the right top of the meter scale sheet.
4 Replace the acrylic panel, and tighten the screws.
Note
After the meter scale sheet has been attached, check that the meter scale is not crooked.
41