Settings from the Setup Menu
Basic Menu Operation

This section describes basic operating procedures for using a menu, taking the 9. PARAMETER LOCK sub- menu as an example.

ADJUST knob

FUNCTION switch

1 Set the FUNCTION switch to

SETUP.

The sub-menu page of the SETUP menu that was used when the last menu operation was performed appears.

2 Turn the ADJUST knob until the desired sub-menu page appears. In this case, turn the ADJUST knob until the ninth sub-menu, 9. PARAMETER LOCK sub-menu, appears.

3 Press the ADJUST knob to access the appropriate sub-menu.

The unit displays the setting sub- menu to be used to make the settings.

The return mark blinks.

The return mark blinks.

4 Turn the ADJUST knob to the right.

The unit allows you to select the item to be set.

The return mark disappears from the LCD and the cursor moves to the first of the item that can be set. The first item, METER in this example, blinks.

When the corresponding sub- menu has multiple items, such sub-menus are displayed as follows.

The first item blinks.

Shows there are other items that can be set.

When there are multiple items, go to step 5.

When there is only one item, go to step 7.

24