Note

When L-R LINK is set to ON, you cannot work on the 8. OUTPUT COMP R sub-menu. If you select the

8.OUTPUT COMP R sub-menu and press the ADJUST knob, the following message appears.

9.PARAMETER LOCK Sub-Menu

This sub-menu allows you to lock parameters set on the following sub- menus.

•4. LCF

•5. CH LINK/M-S

•6. INPUT LIMITER

•7. OUTPUT COMP L

•8. OUTPUT COMP R

•11. METER SELECT

You can select the lock function on each sub-menu.

9.PARAMETER LOCK sub- menu

Turning the ADJUST knob to the right changes the setting item in the following sequence: METER t LCF t IN LIMIT t OUT COMP (including L and R) t LINK/M-S.

Turning the ADJUST knob to the left changes the selection changes in the following sequence: UNLOCK t LOCK.

Default setting: UNLOCKFor locked sub-menus

LOCK is displayed (blinking) at the top right of the sub-menu. On this sub- menu you cannot change to the setting mode even if you press the ADJUST knob.

31