1 PEAK indicator

Lights in red when the output signal reaches –3 dB from a clipping level. When the output compressors/limiters activate, this indicator lights to indicate the compressor/limiter operations, as follows.

When the input level exceeds the preset threshold level, the output compressors activate and the indicator lights in orange.

When the input level exceeds the preset threshold level, the limiters activate and the indicator lights in red. The OUTPUT COMP L and OUTPUT COMP R sub-menus of the SETUP menu allow you to make settings of the threshold level for the compressors/limiters.

2 MASTER LINK switch Setting the switch to the LINK position links the Left channel output and Right channel output of the master output. The L MASTER volume control adjusts the output level of both channels. In this case, the R MASTER volume control is not activated. This function is not applied to the output compressor/limiter.

3 L/R MASTER volume control Adjusts the output level. The adjustable range is – ∞ dB at the fully counterclockwise position, 0 dB and +10 dB at the fully clockwise position.

Left Panel

1 Battery compartment

2 DC OUT connector

3 INPUT connector

5 CASCADE IN connector

4 LINE/MIC/MIC +48V switch

1 Battery compartment Accommodates eight LR6 (size AA) alkaline batteries.
2 DC OUT connector (4-pin, female)

Supplies the power to a UHF portable tuner WRR-860A/861A/862A (option).

13