When you want to perform an operation such as a reset (12. HOURS METER
5 Turn the ADJUST knob until the desired item blinks.
Turning it to the right results in the cursor moving to the next item, and turning it to the left results in the cursor moving to the previous item.
6 Press the ADJUST knob.
The cursor moves to the selection, or the set value of the selected item, and the selection or set value blinks.
The selection or set value blinks.
7 Turn the ADJUST knob to the right or left until the blinking cursor moves to the desired selection or the desired set value appears.
To reset on the 12. HOURS METER
Turning the ADJUST knob to the right results in RESET or CHECK blinking.
Turn the ADJUST knob to the right or left, and the subsequent selection blinks.
To increase or decrease the set value:Turning the ADJUST knob to the right or left increases or decreases the set value step by step.
While adjusting the value:The unit operates using the value which is currently being adjusted. You can select the appropriate value while monitoring the response of the unit to the value as it is adjusted.
8 Press the ADJUST knob to execute the change.
The change is carried out, and the setting is made.
The cursor moves to the setting item and blinks.
When there are multiple setting items to be set, perform the remaining settings by repeating steps 5 to 8.
On the 12. HOURS METER sub- menu or on the 3. CAMERA RETURN
Note
If you turn the power off without executing the change while performing operations in step 7, the settings or changes performed in step
7 are not stored. Be sure to execute the change in step 8 first, and then turn the power off.
25