INSTALLATION

BATTERIES (continued)

Basic charger

When the battery requires charging, you will hear a warning

 

sound and the display will indicate it. Use the charger that is

 

delivered with your portable to charge the battery. Regarding

 

charge time, see section ”Battery description”.

 

Note: For the DT368 the basic charger must be purchased separately.

 

To charge the battery:

 

Connect the adaptor to the mains socket and the

 

charger as shown in the figure below

 

The charging process will start automatically, indicated by a

 

fast flashing battery icon. When charging is complete, the

 

icon stops flashing. While charging, you can use your

 

portable normally.

 

Note: Do not connect your portable to the charger without a battery.

Connect the

Disconnect the

Basic charger

Basic charger

Note: You can remove the connector from your portable at any time. If you wish, you can leave the adaptor in the mains socket when you remove the connector. Use the self adhesive cable clamp to tie the adaptor cable.

66

BusinessPhone 250

/ BusinessPhone 50

Portable DT310

/ DT360 / DT368

Page 68
Image 68
Sony DT368, DT310 Batteries Basic charger, Connect the adaptor to the mains socket, Charger as shown in the figure below