DURING CALLS
MUTE RINGER OR |
|
WARNING | If the portable rings or a warning sounds at an inconvenient |
| moment, e.g. when the battery runs low you will be warned |
| by a battery low sound (4 short beeps). |
| Press shortly to mute the ringing or warning for |
| the moment |
| The Ringer Off icon turns on to indicate that ringing is |
| suppressed. |
| Note for DT368: If you mute a warning sound, do not press |
| longer than two seconds, otherwise you will turn off the phone. |
| When a warning occurs during a call and you want to mute |
| the microphone, the first press always mutes the |
| warning sound. The second press mutes the microphone. |
|
|
DIAL MODE | When calling interactive tele services, you must press certain |
| keys (post dial) to give your response. If your portable uses |
| tone dialling (DTMF) to make the call, just press the keys |
| requested by the tele service. If your portable uses pulse- |
| dialling, you must manually change to tones, after the call is |
| established: |
| Note: After you end the call, dialling is always reset to the |
| default method. |
|
|
Change to tones |
|
on DT310 |
|
| Press to switch to tones |
| Press any key to respond |
| Some services do not work on standard DTMF tones. They |
| require ring tones. |
(continued)
BusinessPhone 250 / BusinessPhone 50 | 27 |
Portable DT310 / DT360 / DT368 |
