Problem |
| Point to check | Solution |
|
|
|
|
Stapled output does |
| Is the paper curled? | It may help to turn the paper over in the paper tray. |
not collect neatly. |
|
|
|
|
|
|
|
OTHER PROBLEMS
Problem | Point to check |
| Solution |
Preview images or | Are there a number of jobs waiting to be | Wait until several of the jobs have been executed. | |
thumbnail images do | executed? |
|
|
not appear. |
|
|
|
The display screen is | Is the display contrast properly | Adjust the display contrast with "Display Contrast" in the | |
difficult to view. | adjusted? | system settings. |
|
You were logged out | Did Auto Clear activate? | When user authentication is used, the currently logged | |
without having |
| in user will be automatically logged out if Auto Clear | |
performed logout |
| activates. |
|
yourself. |
| Log in again. |
|
|
| If you are the administrator, you can change the time | |
|
| setting of Auto Clear or disable Auto Clear in "Auto | |
|
| Clear Setting". |
|
|
| ➞System Settings (Administrator) (Web page only) > | |
|
| "Operation Settings" > "Other Settings" > "Auto Clear | |
|
| Setting" |
|
You forgot the | Was the administrator password | Contact your dealer or nearest SHARP Service | |
administrator | changed from the factory default | Department. |
|
password. | setting? | For the factory default administrator password, see "TO | |
|
| THE ADMINISTRATOR OF THE MACHINE" in the | |
|
| Safety Guide. After changing the password, take special | |
|
| care to remember it. |
|
The actuator came off | When removing printed output, do you | While removing the output, if you forcibly pull up or fold | |
(when a finisher is not | forcefully lift the paper up or fold the | the output, the actuator may come off. | |
installed) | paper? | If the actuator comes off, follow the steps below to | |
|
| reattach it. |
|
|
| (1) Lift the mount for the actuator with your finger. | |
|
| Hold the mount with your finger. | |
|
| (2) Insert in the direction of the arrow as far as the | |
|
| actuator will go. |
|
|
| Do not forcibly press the actuator into the mount. | |
|
| The actuator may break. | |
|
| (2) |
|
|
|
| (1) |
|
| Actuator |
|
|
| Orientation of the actuator | |
|
|
| When attaching the |
|
| Top side | actuator, make sure |
|
| it is attached with | |
|
|
| |
|
|
| the top side up. |