Installation / Connections
3.5 (1 7/16)
Wall
Units: cm (inches)
Connections
Connecting the AC Power Cord
1 Plug the power cord into the AC IN socket. Then, attach the AC plug holder (supplied) to the AC power cord.
Hooked on the wall: Vertically
Front
Wall
10 (4)
AC IN socket
AC power cord
AC plug holder
20 | 25 |
Wall (7 7/8) | (9 7/8) Wall |
Make sure that the control section is at the bottom
10 (4)
Wall
Side
5 (2)
Wall
Units: cm (inches)
2 Slide the AC plug holder over the cord until it connects to the AC IN socket cover.
AC IN socket cover
To remove the AC power cord
Squeeze the upper and lower sides and pull out the AC plug holder.
Connection Example
Before you start
•First make sure that the power to each piece of equipment is turned off.
•Use connecting cables suitable for the equipment to be connected.
•The cable connectors should be fully inserted into the jacks. A loose connection may cause hum and other noise.
•To disconnect the cable, pull it out by grasping the plug. Never pull the cable itself.
•Read the instruction manual of the equipment to be connected.
14 (GB)