4 Select the caption type.
OFF: The caption is not displayed.
CAPT1: Displays caption1 over the picture.
CAPT2: Displays caption2 over the picture.
TEXT1: Displays caption1 against a black background.
TEXT2: Displays caption2 against a black background.
5 Press MENU.
The menu returns to the CONFIG menu.
Adjusting the time
1 In the CONFIG menu, press M/m to move the
cursor (B) to “TIME SET” and press ENT. The following menu appears on the monitor screen.
T I M E S E T | : | 0 0 : 0 0 : 0 0 |
S E L E C T | S E T ENTER | E N D MENU |
2
3 Adjust the hour with M/m and press ENT. The hour is defined and the background of the minute is displayed in cyan.
4 Similarly, adjust the minute and press ENT. The minute is defined and the second is reset to 00.
To display the time, press the DISPLAY button on the Remote Commander. The time is displayed in the
Watching the Picture
Input Signal and Monitor Status Information Display
Input signal and monitor status information is displayed on the monitor screen for about five seconds when turning on the power or switching the input signal.
To disable this function, follow the steps below.
1 In the CONFIG menu, press M/m to move the cursor (B) to “DISPLAY” and press ENT. The following menu appears on the monitor screen.
D I S P L A Y | : | O N |
2 Press M/m to set DISPLAY to OFF and press ENT.
The DISPLAY function is disabled.
To activate the information function, set DISPLAY to ON in step 2 above. The factory default is ON.
Note
You can display the input signal information and the time anytime by pressing the DISPLAY button on the Remote Commander, regardless of the above setting.
The input signal information list
Color system or horizontal/vertical frequency
Signal type | Time |
|
|
3 1 . 5 k H z / 6 0 H z | 1 6 : 3 0 : 4 0 |
R G B 1 R G B |
|
|
|
21 (GB)