Location and Function of Parts and Controls
4RGB1 OUT connectors
These connectors are used as loop-through outputs of the RGB1 IN connectors 1.
When the plug is connected to the RGB OUT connectors, the 75-ohms termination of the RGB IN connectors is released, and the signal input to the RGB IN connectors is output from the these connectors.
R (R-Y)/G (Y)/B (B-Y) OUT (BNC-type): Loop-
through outputs of the RGB IN connectors. Connects to the RGB signal or component (Y/B- Y/R-Y) signal input of another monitor.
HD/COMP OUT (BNC-type): Loop-through output of the HD/COMP IN connector. Connects to the H sync signal or composite sync signal input of another monitor.
VD OUT (BNC-type):Loop-through output of the VD IN connector. Connects to the V sync signal input of another monitor.
Note
The HD/COMP OUT and VD OUT connectors are high impedance outputs.
When using these outputs, connect a monitor with a high impedance sync input connector, or the picture might oscillate or disappear because of the sync signal level mismatch.
AUDIO OUT (L/R) (phono type): Loop-through outputs of the AUDIO IN jacks. Connects to the audio inputs of another monitor.
5LINE OUT connectors
These connectors are used as loop-through outputs of the LINE IN connectors 3.
When the plug is connected to the VIDEO OUT connector or Y/C OUT jack, the 75-ohms termination of the VIDEO IN connector or Y/C IN jack is released, and the signal input to the VIDEO IN or Y/C IN jack is output from the VIDEO OUT connector or Y/C OUT jack.
VIDEO OUT (BNC-type): Connects to the composite video signal input of another monitor or video equipment.
Y/C OUT (Mini DIN 4-pin): Connects to the Y/C signal input of another monitor or a piece of video equipment.
AUDIO OUT (L/R) (phono type): Loop-through outputs of the AUDIO IN jacks. Connects to the audio inputs of another monitor or a piece of video equipment.
6REMOTE (RS-232C) connector (mini DIN 8- pin)
This connector allows remote control of the monitor using the RS-232C protocol. For details, contact your authorized Sony dealer.
Left Connector Panel
MONITOR OUT
AUDIO
R | L | 1 |
| |
| VARIABLE | |
| CONTROL S | |
IN | OUT | 2 |
| SPEAKERS | |
| (6-16 Ω ) | |
+ | + | 3 |
R– | L |
| – | |
SERVICE CODE
8.8. 4
5
AC IN
1MONITOR OUT AUDIO (L/R) jacks (phono type)
Outputs the signal input from the AUDIO IN jacks. Connects to the audio inputs of an audio amplifier (not supplied).
Note
These jacks are variable outputs. Set the volume to the maximum position to set the output level to
500 mVrms.
