Watching the Picture
Watching the Picture
Before you start
•Turn on the monitor.
•Turn on the connected equipment and play a video source.
•To display the input signal information on the screen when turning on the power or switching the input signal, set “DISPLAY” in the CONFIG menu to ON.
•To select the
Switching the Input Signal
1 Press CTRL on the control panel of the monitor. The RGB1, YUV, RGB2, LINE, and Y/C buttons light up.
2 Select the input source to be displayed by pressing the following buttons.
RGB1:Selects the audio and video signal input from the RGB1 connectors when the input signal is an RGB signal.
YUV: Selects the audio and video signal input from the RGB1 connectors when the input signal is a component signal.
RGB2:Selects the audio and video signal input from the RGB2 connectors.
LINE: Selects the audio and video signal input from the VIDEO IN connector and AUDIO IN jack among the LINE connectors.
Y/C: Selects the audio and video signal input from the Y/C IN connector and AUDIO IN jack among the LINE connectors.
Color system or horizontal/vertical frequency
Signal type
P A L
L I N E Y / C
The selected input signal appears on the monitor screen.
You can also switch the input signal with the Remote Commander.
Note
We recommend input source video equipment equipped with a TBC (time base corrector). If the monitor receive a signal without TBC, the picture may disappear due to disturbance of the sync signal.
Switching the Display Mode
Displaying Closed Captions
1 Press MENU.
The main menu appears on the monitor screen.
M A I N M E N U
P I C C O N T R O L
P I C S I Z E
C O N F I G
M E M O R Y
R E M O T E
S T A T U S
S E L E C T | S E T ENTER | E N D MENU |
2 Press M/m to move the cursor (B) to “CONFIG” and press ENT.
The CONFIG menu appears on the monitor screen.
C O N F I G |
|
|
|
D I S P L A Y | : |
| O N |
C L O S E D C A P T I O N : |
| O F F | |
C O L O R S Y S T E M | : | A U T O | |
S C R E E N F I L L | : C E N T E R | ||
P O W E R C O N T R O L |
|
| |
S C R E E N S A V E R |
|
|
|
T I M E S E T |
|
|
|
L A N G U A G E |
|
|
|
S E L E C T | S E T ENTER | E N D MENU | |
|
|
|
|
3 Press M/m to move the cursor (B) to “CLOSED CAPTION” and press ENT.
The following menu appears on the monitor screen.
C L O S E D C A P T I O N : | O F F |
20 (GB)