Resizing and Positioning the Picture / Adjusting the Pixels
Note
If you use the wide zoom mode, it is recommended that you set the H SIZE, H SHIFT, V SIZE and V SHIFT to the standard (00) . If you change them too much, the wide zoom display may be distorted. Before you use the wide zoom mode, set ZOOM to ⋅1. If ZOOM is set to ⋅2, ⋅3 or ⋅4, the wide zoom mode cannot be used.
Adjusting the Pixels
If there is too much noise on the edges of the characters or the vertical lines, you can adjust the dot phase and total number of horizontal pixels.
1 Press MENU.
The main menu appears on the monitor screen.
M A I N M E N U
P I C C O N T R O L
P I C S I Z E
C O N F I G
M E M O R Y
R E M O T E
S T A T U S
S E L E C T | S E T ENTER | E N D MENU |
2 Press M/m to move the cursor (B) to “PIC SIZE” and press ENT.
The PIC SIZE menu appears on the monitor screen.
P I C | S I Z E |
|
|
H | S I Z E | : | 0 0 |
H | S H I F T | : | 0 0 |
V | S I Z E | : | 0 0 |
V | S H I F T | : | 0 0 |
R E S E T |
|
| |
A S P E C T | : | 4 X 3 | |
Z O O M | : | X 1 | |
P I X E L A D J U S T |
|
| |
S E L E C T | S E T ENTER | E N D MENU | |
|
|
|
|
3 Press M/m to move the cursor (B) to “PIXEL ADJUST” and press ENT.
The following menu appears on the monitor screen.
P I X E L A D J U S T |
|
|
A U T O |
|
|
D O T P H A S E | : | 5 0 |
T O T A L H P I X E L : | 8 0 0 | |
R E S E T |
|
|
S E L E C T | S E T ENTER | E N D MENU |
4 You can adjust the dot phase and total number of horizontal pixels automatically or manually.
Adjusting automatically
(1)Select AUTO with M/m and press ENT. The following menu appears on the monitor screen.
P I X E L A D J U S T |
|
|
A U T O | : | N O |
S E L E C T | S E T ENTER | E N D MENU |
(2)Select YES with M/m and press ENT.
The dot phase and total number of horizontal pixels are adjusted automatically.
Adjusting manually
(1)Select DOT PHASE or TOTAL H PIXEL with M/m and press ENT.
The following menu appears on the monitor screen. (The illustration below is for selecting the DOT PHASE.)
D O T P H A S E | : | 5 0 |
28 (GB)