On/Off Timer Function
1 In the CONFIG menu, Press M/m to move the cursor (B) to “POWER CONTROL” and press ENT.
The following menu appears on the monitor screen.
P O W E R C O N T R O L |
|
|
P O W E R S A V I N G | : | O F F |
O N / O F F T I M E R | : | O F F |
S E L E C T | S E T ENTER | E N D MENU |
2 Press M/m to move the cursor (B) to “ON/OFF TIMER” and press ENT.
The following menu appears on the monitor screen.
O N / O F F T I M E R | : | O F F |
3 Select ON with M/m and press ENT.
The following menu appears on the monitor screen.
O N / O F F | T I M E R | : |
| O N |
O N T I M E |
| : | 1 6 : 3 0 | |
O F F | T I M E |
| : | 1 7 : 2 0 |
S E L E C T | A D J U S T ENTER | E N D MENU |
4 Press ENT.
The cursor (B) appears on the monitor screen.
Controlling Power On/Off Automatically (Power Control Function)
5 Press M/m to move the cursor (B) to “ON TIME” and press ENT.
The following menu appears and the background of the hour is displayed in cyan.
O N / O F F T I M E R | : |
| O N |
O N T I M E |
| : | 1 6 : 3 0 |
S E L E C T | S E T ENTER | E N D MENU |
6 Set the hour with M/m and press ENT.
The hour is defined and the background of the minute is displayed in cyan.
7 Set the minute with M/m and press MENU.
The minute is defined and the menu returns to the ON/OFF TIMER menu.
8 Similarly, set the OFF TIME.
Notes
•The power saving function does not work when the signal is input from the LINE connectors.
•If the sync signal is not connected to the HD/COMP IN connector, the monitor does not turn on even if the sync signal is input. Be sure to set POWER SAVING to OFF when only the RGB signal is connected.
•If the sync signal is not connected to the 13th pin of the RGB IN
•The power saving function, on/off timer function and power off function in the PIC INVERSION mode cannot be used simultaneously. When one of those functions is set to ON, “– – –
•If you set ON TIME and OFF TIME to the same
time, the setting of ON TIME takes priority over that of OFF TIME. The monitor does not turn off at the
OFF TIME.
35 (GB)