Using the Memory Function
6 Press M/m to move the cursor (B) to “NAME SET” and press ENT.
The following menu appears on the monitor screen.
S A V E / N o . 0 1 [ | · · · · · · · · | · · ] |
N A M E S E T : [ | ü V v b·fHfV%B . | : ] |
S E L E C T | S E T ENTER | E N D MENU |
Character list
7 Select the character to be changed with M/m and press ENT.
The background of a character in the character list changes to cyan.
8 Select a character in the character list with M/m and press ENT.
The selected character is input.
9 Repeat steps 7 and 8 until you finish inputting the name, then press MENU.
The menu returns to the SAVE menu.
Note
If the storing of the setting fails, the “SAVE ERROR” message appears on the monitor screen. Try to store the setting again.
Calling Up a Stored Setting
1 In the MEMORY menu, press M/m to move the cursor (B) to “LOAD” and press ENT.
The first page of the stored settings appears on the monitor screen.
L O A D / N o . 0 1 [ · · · · · · · · · · ]
- | R G B / fH 3 1 | . 5 kHz / fV 5 9 . 9 Hz / P O L [ N / N ] - | ||
C O N T R A S T |
| : | 8 0 | |
B R I G H T N E S S | : | 0 0 | ||
C O L O R T E M P | : | H I G H | ||
H | S I Z E |
| : | 0 0 |
H | S H I F T |
| : | 0 0 |
V | S I Z E |
| : | 0 0 |
V | S H I F T |
| : | 0 0 |
A S P E C T |
| : | 4 X 3 | |
Z O O M |
| : | X 1 | |
S E L E C T | V E R I F Y ENTER | E N D MENU | ||
2 Select a memory number (01 to 20) with M/m and press ENT.
The second page of the stored settings appears on the monitor screen.
L O A D / N o . 0 1 [ · · · · · · · · · · ]
- R G B / fH 3 1 . 5 kHz / fV 5 9 . 9 Hz / P O L [ N / N ] -
C H R O M A | : | 0 0 |
P H A S E | : | 0 0 |
P I C T U R E A G C | : | O N |
S H A R P N E S S | : | M I D |
H L I N E A R I T Y | : | 0 0 |
V L I N E A R I T Y | : | 0 0 |
D O T P H A S E | : | 5 0 |
T O T A L H P I X E L : | 8 0 0 | |
S E L E C T | S E T ENTER | E N D MENU |
The signal type and the color system or horizontal/ vertical frequency are displayed in cyan (showing that the signal type of the selected memory number is the same as that of the current setting and you can call up the stored setting) or in red (showing that the signal type of the selected memory number is not the same as that of the current setting and you cannot call up the stored setting).
3 Press ENT.
The “LOAD COMPLETED” message appears for about five seconds and the picture is adjusted to the selected setting.
Note
If the loading fails, the “LOAD ERROR” message appears on the monitor screen. Try to load the setting again.
30 (GB)