(2)Adjust the dot phase or total number of horizontal pixels with M/m and press ENT.

To restore PIXEL ADJUST menu items to their original settings

In the PIXEL ADJUST menu, press M/m to move the cursor (B) to “RESET” and press ENT. Then select YES with M/m and press ENT.

Using the Memory

Function

You can save the current picture setting for each input signal using the MEMORY function. The saved settings can be restored whenever necessary. The items in the PIC CONTROL and PIC SIZE menus can be memorized. You can save the picture settings of up to twenty input signals. You can name the settings of the items (up to 10 characters in length).

Storing the Current Setting

1 Press MENU.

The main menu appears on the monitor screen.

M A I N M E N U

P I C C O N T R O L

P I C S I Z E

C O N F I G

M E M O R Y

R E M O T E

S T A T U S

S E L E C T

S E T ENTER

E N D MENU

2 Press M/m to move the cursor (B) to “MEMORY” and press ENT.

The MEMORY menu appears on the monitor screen.

M E M O R Y

L O A D

S A V E

S E L E C T

S E T ENTER

E N D MENU

Adjusting the Pixels / Using the Memory Function

3 Press M/m to move the cursor (B) to “SAVE” and press ENT.

The following menu appears on the monitor screen.

Memory number

Setting name

 

 

 

 

 

S A V E / N o . 0 1

[ · · ·

·

· · ·

· · · ]

- R G B / fH 3 1

. 5 kHz / fV 5

9

. 9 Hz /

P O L [ N / N ] -

S A V E

E X E C U T E

 

 

 

N A M E

S E T

 

 

 

S E L E C T S E T ENTERE N D MENU

Signal type

Color system or horizontal/

 

vertical frequency

If there is no data in the selected memory number, the “– – EMPTY – –” message appears on the monitor screen in cyan. The signal type and the color system or horizontal/vertical frequency are displayed in cyan (showing that the signal type of the selected memory number is the same as that of the current setting) or in yellow (showing that the signal type of the selected memory number is not the same as that of the current setting).

4 Select a memory number (01 to 20) with M/m and press ENT.

The cursor (B) appears on the monitor screen.

5 Press M/m to move the cursor (B) to “SAVE EXECUTE” and press ENT.

The current data is stored under the selected memory number. The “SAVE COMPLETED” message appears for about five seconds. When you name the setting, follow the steps below.

29 (GB)